Connect a JR Timeclock with an Ethernet Cable (LAN)

You will need the timeclock admin and super admin PIN passcodes to access the timeclock menus.  Reach out to the Administrator for your account regarding this information.

To connect a JR2000 or NX2500 timeclock with an ethernet cable (LAN):

1. Tap the screen.
2. Enter your five-digit administrator passcode and press ENTER.
3. Select NETWORK.
4. Next to Network Connection, select LAN.
5. If successful, you will receive a "LAN CONNECTED" message.
6. Select DONE.