uAttend Support

Menu

Articles in this section

See more

Test an RFID Card on a CB Timeclock Follow

Avatar
Kristina Hofreiter
  • Updated

As the account admin, you will want to be able to effectively manage the timeclocks on your account.  The articles here are meant to give you an understanding of the features and functions of your CB series (CB5000, CB5500, CB6000, CB6400, CB6500) device(s).

Notes:

  • There are also settings and features to configure in the cloud portal that relate to your (CB5000, CB5500, CB6000, CB6400/CB6500) timeclock(s).
  • You will need your company ID (to find your account) and have access to the administrator email address (to receive an activation code) when adding a new timeclock to your account.
  • Verify with your IT department that the timeclock has been allowed free communication (to and from our servers) on all ports and to/from all addresses on the lists in this article.

 

To test the RFID card on the CB timeclock:

  1. Press the MENU key.
  2. Enter the five-digit administrator passcode.
  3. Press OK.
  4. Use the up and down arrows to select SYSTEM MANAGEMENT. 
  5. Press OK.
  6. Use the up and down arrows to select DIAGNOSTICS.
  7. Press OK.
  8. Use the up and down arrows to select TEST RFID CARD.
  9. Press OK. 
  10. Tap the RFID Card on the sensor.

 

Related articles