Forget a WIFI Network on an RE2000 Time Clock

If the RE2000 time clock is connected to the wrong Wi‑Fi network or you need to update its network connection, you can remove the saved network directly from the device. Forgetting a Wi‑Fi network allows you to reconfigure the time clock with new network settings as needed. Follow the steps below to forget a Wi‑Fi network on the RE2000 time clock.

You will need the time clock admin and super admin passcodes to access the time clock menus.  Reach out to the Administrator for your account regarding this information.

Note: If your device is running an earlier software version, it may not detect or connect to Wi‑Fi networks with an SSID (network name) of 16 characters or fewer.

This behavior applies during initial setup and is resolved in version 1.00.03.

If your network does not appear or you’re unable to connect:

• Confirm your Wi-Fi network name is 16 characters or fewer, or
• Use a temporary network with a shorter name to complete setup

After connecting, perform an /link to enable support for longer network names.

To forget a WIFI network on the RE2000 time clock:

1. Press the MENU key.
2. Enter the five-digit administrator passcode.
3. Press OK.
4. Scroll down to WIFI. 
5. Press OK.
6. Press OK to select Network Settings.
7. Press OK to select Edit Network Settings.
8. Press OK to select Forget this network.
9. Press OK again to forget the network. 

The device will begin searching for networks. Select and reconnect to your network.