Job Tracking from a CB Model Timeclock

As an employee, you can use a uAttend timeclock after your administrator has configured your profile to do so.  Check out this article to learn more.

This article covers the following models:  CB5000, CB5500, CB6000, CB6400/CB6500

Notes:

• Your admin must configure a PIN or RFID authentication method on your profile before you can use a timeclock.
• Contact your administrator for timecard corrections and/or to resolve access issues in your profile.
• Contact your administrator to resolve any issues regarding the timeclock (error messages).

To start a job using a uAttend CB Series timeclock:

1. Press the DT-JT (department transfer-job tracking) button.
2. Use the Arrow button to select the Start Job option.
3. Press the OK button.
4. Authenticate at the timeclock with your PIN or RFID badge/key fob.
5. Use the Arrow button to select the intended job.
6. Press the OK button.
7. Use the Arrow button to select the intended job detail (if applicable).
8. Press the OK button.
9. Press the OK button.
10. Press the OK button to clear the confirmation screen.

To end a job using a uAttend CB Series timeclock:

1. Press the DT-JT (department transfer-job tracking) button.
2. Use the Arrow button to select the End Job option.
3. Press the OK button.
4. Authenticate at the timeclock with your PIN or RFID badge/key fob.
5. Press the OK button to clear the confirmation screen.